|
Cal-stat Options
|
| Option
Description |
Option
Code |
| Factory
Temperature Setting |
A |
| Above 120° F |
A |
| 0 - 120° F |
A |
| Below 0° F |
A |
| Extended Shell
Length with Sensitivity at Bottom |
B |
| First
Additional Inch |
B |
| Each Additional
Inch |
B |
| Extended Shell
Length with Sensitivity at Top |
C |
| First
Additional Inch |
C |
| Each Additional
Inch |
C |
| Tamper
Resistant Plug |
D |
| Moisture
Resistant Seal |
E |
| General Purpose
Terminal Housing |
G |
| Extended
Adjusting Screw |
H |
| First Inch |
H |
| Each Additional
Inch |
H |
| Optional Lead
Lengths Each Foot or Fraction |
J |
| Plastic Boot
Over Adjusting Screw |
K |
| Armored Cable
Over Leads |
L |
| First Foot |
H |
| Each Additional Foot or Fraction of a Foot |
H |
| Temperature
Calibration Lock (See Option "A" for additional charge for setting) |
M |
| Moisture
Resistant Terminal Housing |
N4 |
| Explosion
Resistant Teminal Housing |
N7 |
| Extended
Adjusting Sleeve |
O |
| First Inch |
O |
| Each additional
inch or fraction |
O |
| Special Shell
Material |
P |
| Special Marking |
R |
| Ground Wire |
U |
| First Foot |
U |
| Each Additional Foot or Fraction |
U |
| Blockhead
Fitting |
BH |
|
* Some options may not be available with other
option combinations or 1/4" diameter models. Contact factory for details.
|
