|
|
|
Finned Strip Heaters
are manufactured
with the same one piece welded construction as the standard Strip Heaters except heat dissipating fins are added to the outer
sheath. The fins are specially designed and mechanically attached to provide efficient heating in many air or gas process heating
applications. Lengths are available up to 10 feet. Construction is Underwriters Labs recognized, including Canadian Recognition.
Click on product to view larger image... |
 |
Type OSF
Terminals offset at one end |
 |
 |
Type PTF
Terminals side by side at one end |
 |
Type TDF
Terminals in tandem at one end |
|
 |
Type EEF
Terminals one at each end |
Construction Features:
- Steel sheath models are suitable for operating temperatures to 750° F (300 C)
- Stainless sheath models are suitable for operating temperatures to 1200° F (649 C)
- Premium grade ceramic and magnesium oxide insulation
- High temperature nickel chromium resistance wire
- Low profile design - fins measure 2" x 1 3/8"
- Several standard #10-32 screw and nut terminations
- Convenient 5/16" x 1/2" mounting holes each end
- Many catalog wattage, voltage, and length combinations
- Special enclosure models with standoff brackets are available
- Standard and custom options available
Typical Heating Applications:
- Process Air Heating
- Drying Cabinets and Equipment
- Comfort Heating
- Shrink Tunnels
- Humidity Control
- Resistive Load Banks
|
|
|
 |
