Bottom Outlet

Close Bottom Outlet Zoom
  • Bottom-mount design
  • Standard copper sheath; other options available
  • Easily installed in many types of vessel
REQUEST A QUOTE

Vulcan Bottom Outlet Heaters provide an alternative installation method where flange and bushing mountings are not desirable or practical. They are installed through a hole in the bottom of a vessel without the need for additional mounting provisions. This same installation design can also be used with other Vulcan horizontal heaters.

  • Rugged Tubular heating element construction including compacted magnesium oxide and nickel chromium wire
  • Copper sheath material is standard, other selections are available
  • General purpose terminal housing is provided on catalog models
  • Integral or remote thermostat temperature controls are available
  • Many catalog wattage, voltage, and length combinations
  • Standard and custom options available
  • Armorwall explosion resistant construction available for hazardous or abusive environments
  • Steam Tables
  • Booster Heating
  • Coffee Urns
  • Sterilizers
  • Humidifiers

Models and Options

BOTTOM OUTLET HEATERS- MODELS WITHOUT LOW WATER CUT OFF - TYPE ANW

120 Volt240 VoltWattsWatt
Density
w/sq. in.
Overall
Length in.
Overall
Length mm
Approx.
Wt. lb
Approx.
Wt. kg
ANW-110AANW-110B1000237.5190.54.41.9
ANW-115AANW-115B1500347.5190.54.41.9
ANW-120AANW-120B2000339.5241.34.52
ANW-125AANW-125B2500646.75171.454.31.9
ANW-130AANW-130B3000776.75171.454.31.9
ANW-140AANW-140B4000689.5241.34.72
ANW-250AANW-250B50004412.5317.552.2
ANW-260AANW-260B60005413.5342.96.52.8
ANW-270AANW-270B70006214.5368.373

BOTTOM OUTLET HEATERS- MODELS WITh LOW WATER CUT OFF - TYPE ANW (WITH LCO)

120 Volt240 VoltWattsWatt
Density
w/sq. in.
Overall
Length in.
Overall
Length mm
Approx.
Wt. lb
Approx.
Wt. kg
ANW-110A-LCOANW-110B-LCO1000237.5190.54.41.9
ANW-115A-LCOANW-115B-LCO1500347.5190.54.41.9
ANW-120A-LCOANW-120B-LCO2000339.5241.34.52
ANW-125A-LCOANW-125B-LCO2500646.75171.454.31.9
ANW-130A-LCOANW-130B-LCO3000776.75171.454.31.9
ANW-140A-LCOANW-140B-LCO4000689.5241.34.72
ANW-250A-LCOANW-250B-LCO50004412.5317.552.2
ANW-260A-LCOANW-260B-LCO60005413.5342.96.52.8
ANW-270A-LCOANW-270B-LCO70006214.5368.373
Construction Details:
Heater: Low profile copper heater tube sheath
Overall length is measured end to end
All units measure 4″ (101.6 mm) wide
All units measure 2-1/4″ (57.2 mm) deep (from mounting flange to top of heater tubes)
Mounting: Designed for mounting through 2-7/16″ hole in bottom of tank
Special flange assembly with gasket requires no special fitting in tank
Terminal Housing: Rugged general purpose terminal housing is provided for wiring connections
Models with Cut Off: Thermostat cuts off power to heater if water drops below top most tube
Custom: Custom lengths, watts, and volts are available

Option Code Description
WX Special Wattage
VX Special Voltage and /or phase
G Custom Configurations
FM Special Flange Materials
SX Special Sheath Materials
KM Special Gasket Material
MH Moisture Resistant Terminal Housing
LC Low water cut-out

Thermal Engineering For Your Industry

We engineer solutions for complex requirements, used in a broad range of industries and applications.

WORK WITH A SPECIALIST REQUEST A QUOTE